Corrosion Inhibitor - Types, Uses

Corrosion Inhibitor is a chemical solvent which is applied in a given environment to reduce the rate of corrosion of the metal which is subjected to that specific environment, such as air or water. The corrosion inhibitor can be abbreviated to CI.

Table of Contents

What is a Corrosion Inhibitor?

A chemical compound that can be added to liquids or gases and used to decrease the corrosion rate of a given material (usually a metal) can be referred to as a corrosion inhibitor.

One method for the inhibition of corrosion would be the addition of a coating on the surface of the metal which acts as a passivation layer and disallows access to the surface of the metal.

Types of Corrosion Inhibitor

Corrosion inhibitors can be classified into four general types based on the method in which they work on the metal to prevent corrosion. These types are:

Cathodic Inhibitor

Cathodic inhibitors can work to slow the cathodic reaction down or they can work to selectively precipitate on the cathodic regions of the metal in order to restrict the diffusion to the metal surface of the elements that are eroded.

Examples for Cathodic Inhibitors include sulfite and bisulfite ions which can react with oxygen to form sulphates. Another example of a cathodic inhibitor is a catalyzed redox reaction by nickel.

Anodic Inhibitor

These types of corrosion inhibitors form a thin preventive oxide layer on the surface of the metal. This reaction leads to a big anodic shift, turning the metallic surface into a passivation area. This passivation area helps in reducing the corrosion of the metal.

Examples for anodic inhibitors include chromates, nitrites, orthophosphates, and molybdates.

Volatile Corrosion Inhibitor

Volatile corrosion inhibitors can be used to halt the corrosion of condenser tubes in boilers. They are also referred to as vapour phase inhibitors or VPIs.

VPIs work by changing the pH of the exterior atmosphere to less acidic conditions in order to control corrosion. Examples include morpholine and hydrazine which are used to control the corrosion of the condenser pipes in boilers.

Mixed Inhibitors

These types of corrosion inhibitors also form a film on the surface of the metal. They work to reduce cationic reactions as well as anionic reactions. This is done via the formation of a precipitate on the surface of the metal.

Examples for Mixed inhibitors include silicates and phosphates which are used as water softeners to stop the rusting of water.

Uses of Corrosion Inhibitors

Corrosion Inhibitors have a wide range of uses in commercial, process, and industrial environments. Some of these uses are listed below.

  • Corrosion Inhibitors are used to stop rusting and anodic corrosion of metals. This is generally done via the coating of the metal surface with a chromate layer.
  • Oxygen scavengers can be used as CIs to react with dissolved oxygen in the environment and can help in preventing cathodic corrosion.
  • It is very important to prevent rusting and corrosion of fuel pipelines. Therefore, CIs are very important in securing these pipelines and reducing the risk of accidents.
  • Metal pipes in heating systems are prone to corrosion. CIs play an important role in securing these pipes as well.

Frequently asked questions

1. Name the types of corrosion inhibitors.

Ans: There are three types of corrosion inhibitors. They are:

  • Cathodic Inhibitor
  • Anodic Inhibitor
  • Mixed Inhibitor

2. Define anodic inhibitors.

Ans: A inhibitor which forms a protective oxide film on metal’s surface and causes an anodic shift of the corrosion potential is defined as an anodic inhibitor.

3. What is meant by an anti-corrosive agent?

Ans: Anti-corrosion means to protect the metal’s surface from corroding at high-risk environments.

Read more:

Test your Knowledge on Corrosion inhibitor!

Comments

Leave a Comment

Your Mobile number and Email id will not be published.

*

*

close
close

Play

&

Win