NCERT Exemplar Class 11 Physics Solutions for Chapter 9 - Mechanical Properties Of Solids

NCERT Exemplar Solutions for Class 11 Physics Chapter 9 Mechanical Properties of Solids help you get ready for the CBSE Class 11 annual exam as well as graduate entrance examinations. This chapter is very important from the exam perspective as it has a good allotment of marks.
NCERT Exemplar Solutions for Class 11 Physics Chapter 9 PDF provide answers for the questions from the NCERT exemplar book, previous years’ question papers, sample papers, and extra questions prepared by the subject experts at BYJU’S. A solid is the strongest state of matter when compared to gases and liquids. Understanding the mechanical properties of solids is important to understand the characteristics of solid materials. To change the shape and size of an object, an external force needs to be applied.

Important Topics of Class 11 Physics Chapter 9 Mechanical Properties of Solids

  1. Elastic behaviour of solids
  2. Stress and strain
  3. Hooke’s law
  4. Stress-strain curve
  5. Elastic moduli
  6. Applications of elastic behaviour of materials.

NCERT Exemplar Solutions for Class 11 Physics Chapter 9 Mechanical Properties of Solids

Download PDF Download PDF

Access NCERT Exemplar Solutions for Class 11 Physics Chapter 9

Multiple-choice Questions I

9.1. Modulus of rigidity of ideal liquid is

a) infinity

b) zero

c) unity

d) some finite small non-zero constant value

Answer:

The correct answer is b) zero

9.2. The maximum load a wire can withstand without breaking when its length is reduced to half of its original length, will

a) be doubled

b) be half

c) be four times

d) remain the same

Answer:

The correct answer is d) remains the same

9.3. The temperature of a wire is doubled. Young’s modulus of elasticity

a) will also double

b) will become four times

c) will remain the same

d) will decrease

Answer:

The correct answer is d) will decrease

9.4. A spring is stretched by applying a load to its free end. The strain produced in the spring is

a) volumetric

b) shear

c) longitudinal and shear

d) longitudinal

Answer:

The correct answer is c) longitudinal and shear

9.5. A rigid bar of mass M is supported symmetrically by three wires, each of length l. Those at each end are of copper, and the middle one is of iron. The ratio of their diameter, if each is to have the same tension, is equal to

a) Ycopper/Yiron

b)

Exemplar Solution Physics Class 11 Chapter 9 Img 29

c)

Exemplar Solution Physics Class 11 Chapter 9 Img 28

d)

Exemplar Solution Physics Class 11 Chapter 9 Img 27

Answer:

The correct answer is b)
Exemplar Solution Physics Class 11 Chapter 9 Img 26

9.6. A mild steel wire of length 2L and cross-sectional area A is stretched, well within the elastic limit, horizontally between two pillars. A mass m is suspended from the mid-point of the wire. Strain in the wire is

Exemplar Solutions Class 11 Physics Chapter 9 - 1

a)

Exemplar Solution Physics Class 11 Chapter 9 Img 25

b)

Exemplar Solution Physics Class 11 Chapter 9 Img 24

c)

Exemplar Solution Physics Class 11 Chapter 9 Img 22

d)

Exemplar Solution Physics Class 11 Chapter 9 Img 21

Answer:

The correct answer is a)
Exemplar Solution Physics Class 11 Chapter 9 Img 20

9.7. A rectangular frame is to be suspended symmetrically by two strings of equal length on two supports. It can be done in one of the following three ways:

Exemplar Solutions Class 11 Physics Chapter 9 - 2

The tension in the strings will be

a) the same in all cases

b) least in a)

c) least in b)

d) least in c)

Answer:

The correct answer is c) least in b)

9.8. Consider two cylindrical rods of identical dimensions, one of rubber and the other of steel. Both the rods are fixed rigidly at one end to the roof. A mass M is attached to each of the free ends at the centre of the rods.

a) both the rods will elongate, but there shall be no perceptible change in shape

b) the steel rod will elongate and change shape, but the rubber rod will only elongate

c) the steel rod will elongate without any perceptible change in shape, but the rubber rod will elongate, and the shape of the bottom edge will change to an ellipse

d) the steel rod will elongate without any perceptible change in shape, but the rubber rod will elongate with the shape of the bottom edge tapered to a tip at the centre

Answer:

The correct answer is d) the steel rod will elongate without any perceptible change in shape, but the rubber rod will elongate with the shape of the bottom edge tapered to a tip at the centre

Multiple Choice Questions II

9.9. The stress-strain graphs for the two materials are shown in the figure.

Exemplar Solutions Class 11 Physics Chapter 9 - 3

a) material (ii) is more elastic than material (i) and hence material (ii) is more brittle

b) material (i) and (ii) have the same elasticity and the same brittleness

c) material (ii) is elastic over a larger region of strain as compared to (i)

d) material (ii) is more brittle than material (i)

Answer:

The correct answers are

c) material (ii) is elastic over a larger region of strain as compared to (i)

d) material (ii) is more brittle than material (i)

9.10. A wire is suspended from the ceiling and stretched under the action of a weight F suspended from its other end. The force exerted by the ceiling on it is equal and opposite to the weight.

a) tensile stress at any cross-section A of the wire is F/A

b) tensile stress at any cross-section is zero

c) tensile stress at any cross-section A of the wire is 2F/A

d) tension at any cross-section A of the wire is F

Answer:

The correct answers are

a) tensile stress at any cross-section A of the wire is F/A

d) tension at any cross-section A of the wire is F

9.11. A rod of length l and negligible mass is suspended at its two ends by two wires of steel (wire A) and aluminium (wire B) of equal lengths. The cross-sectional areas of wires A and B are 1.0 mm2 and 2.0 mm2, respectively.

Exemplar Solutions Class 11 Physics Chapter 9 - 4

a) mass m should be suspended close to wire A to have equal stresses in both the wires

b) mass m should be suspended close to B to have equal stresses in both the wires

c) mass m should be suspended at the middle of the wires to have equal stresses in both the wires

d) mass m should be suspended close to wire A to have equal strain in both wires

Answer:

The correct answers are

b) mass m should be suspended close to B to have equal stresses in both the wires

d) mass m should be suspended close to wire A to have equal strain in both wires

9.12. For an ideal liquid

a) the bulk modulus is infinite

b) the bulk modulus is zero

c) the shear modulus is infinite

d) the shear modulus is zero

Answer:

The correct answers are

a) the bulk modulus is infinite

d) the shear modulus is zero

9.13. A copper and a steel wire of the same diameter are connected end to end. A deforming force F is applied to this composite wire which causes a total elongation of 1 cm. The two wires will have

a) the same stress

b) different stress

c) the same strain

d) different strain

Answer:

The correct answers are

a) the same stress

d) different strain

Very Short Answers

9.14. Young’s modulus for steel is more than that for rubber. For the same longitudinal strain, which one will have greater tensile stress?

Answer:

Young’s modulus is given as:

Exemplar Solution Physics Class 11 Chapter 9 Img 19

When the longitudinal strain is the same for both, steel will have a greater tensile stress.

Exemplar Solution Physics Class 11 Chapter 9 Img 18

Exemplar Solution Physics Class 11 Chapter 9 Img 17

Exemplar Solution Physics Class 11 Chapter 9 Img 16

9.15. Is stress a vector quantity?

Answer:

Stress is neither a scalar quantity nor a vector quantity. It is a tensor quantity. This is because stress is equal to the magnitude of the internal reaction force divided by the area of the cross-section.

9.16. Identical springs of steel and copper are equally stretched. On which, more work will have to be done?

Answer:

When the identical springs of steel and copper are equally stretched, force is given as:

Exemplar Solution Physics Class 11 Chapter 9 Img 15

Because the springs are the same, their length and area will also be the same

Exemplar Solution Physics Class 11 Chapter 9 Img 14

From both equations, we can say that

Exemplar Solution Physics Class 11 Chapter 9 Img 13

9.17. What is the Young’s modulus for a perfect rigid body?

Answer:

According to Hooke’s law,

Young’s modulus = Stress/ Longitudinal strain

When the given body is a perfect rigid body, then the Young’s modulus is given as:

Exemplar Solution Physics Class 11 Chapter 9 Img 12

9.18. What is the Bulk modulus for a perfect rigid body?

Answer:

Bulk modulus is given as:

Bulk modulus = Stress/ Volume strain = pV/∆V

For a perfectly rigid body, bulk modulus is

B = pV/0 = ∞

Short Answers

9.19. A wire of length L and radius r is clamped rigidly at one end. When the other end of the wire is pulled by a force f, its length increases by l. Another wire of the same material of length 2L and radius 2r is pulled by force 2f. Find the increase in length of this wire.

Answer:

Exemplar Solutions Class 11 Physics Chapter 9 - 5

From the given figure, Young’s modulus is given as

Y = (f/A)(L/l)

First case:

Length of wire = L

Radius of wire = r

Force applied = f

Increase in length = l

Exemplar Solution Physics Class 11 Chapter 9 Img 11

Second case:

Length of wire = 2L

Radius of wire = 2r

Force applied = 2f

Increase in length = x

Exemplar Solution Physics Class 11 Chapter 9 Img 10

Therefore, it can be said that x = l.

9.20. A steel rod of length 1 m and area of cross-section 1 cm2 is heated from 0oC to 200oC without being allowed to extend or bend. What is the tension produced in the rod?

Answer:

Young’s modulus of steel, Y = 2.0 × 1011 N/m2

Coefficient of thermal expansion, α = 10-5 oC-1

Length, L = 1 m

Area of cross section A = 1 cm2 = 1×10-4 m2

Rise in temperature = 200oC

Tension produced in rod by the compression is

Y = (T/A)/(∆L/L)

T = 4 × 104 N

9.21. To what depth must a rubber ball be taken in the deep sea so that its volume is decreased by 0.1%.

Answer:

Bulk modulus of rubber = 9.8 × 108 N/m2

Density of sea water = 103 kg/m3

Percentage decrease in volume = 0.1%

Change in pressure, p = hρg

B = ∆P/(∆V/V)

∆P = hρg

h = 100 m

9.22. A truck is pulling a car out of a ditch by means of a steel cable that is 9.1 m long and has a radius of 5 mm. When the car just begins to move, the tension in the cable is 800 N. How much has the cable stretched?

Answer:

Length of steel cable, l = 9.1 m

Radius, r = 5 mm

Tension on the cable = 800 N

Young’s modulus = Y = 2 × 1011 N/m2

Y = (F/A)/( ∆L/L)

∆L = 0.5 × 10-3 m

9.23. Two identical solid balls, one of ivory and the other of wet clay, are dropped from the same height on the floor. Which one will rise to a greater height after striking the flood and why?

Answer:

Ivory ball will rise to a greater height after striking the flood because the ivory ball is more elastic than clay ball and the amount of energy and momentum transferred is more on the ivory ball.

Long Answers

9.24. Consider a long steel bar under tensile stress due to forces F acting at the edges along the length of the bar. Consider a plane making an angle θ with the length. What are the tensile and shearing stresses on this plane?

Exemplar Solutions Class 11 Physics Chapter 9 - 6

a) for what angle is the tensile stress a maximum?

b) for what angle is the shearing stress a maximum?

Answer:

Given,

F is applied along the horizontal

When F is perpendicular = F sin θ

When F is parallel = F cos θ

A is the cross-sectional area of the bar.

The plane aa’ is equilibrium.

Area of the plane aa’ is

Exemplar Solution Physics Class 11 Chapter 9 Img 9

Tensile stress on the plane aa’ is

Exemplar Solution Physics Class 11 Chapter 9 Img 8

Shear stress on the plane aa’ is

F sin 2θ/2A

a) When the tensile stress is maximum θ = 90o

b) When the shearing stress is maximum θ = 45o

9.25. a) A steel wire of mass μ per unit length with a circular cross-section has a radius of 0.1 cm. The wire is of length 10 m when measured lying horizontal, and hangs from a hook on the wall. A mass of 25 kg is hung from the free end of the wire. Assuming the wire to be uniform and lateral strains << longitudinal strains, find the extension in the length of the wire. The density of steel is 7860 kg/m3.

b) If the yield strength of steel is 2.5 × 108 N/m2, what is the maximum weight that can be hung at the lower end of the wire?

Answer:

Let dx be the small element

Let dm be the mass

Let L be the length of the wire

Let x be the distance from the end where it is hung

Let μ be the mass per unit length

Therefore,

dm = μ.dx

r = 0.1 cm

A = π(10)-3

M = 25 kg

L = 10 m

a) The downward force is used for calculating the mass, m = 0.25 kg

b) The maximum weight that can be hung at the lower end of the wire is calculated using the tension in the wire which is the maximum at x = L

Therefore, the mass is = 78.25 kg

9.26. A steel rod of length 2l, cross-sectional area A and mass M is set rotating in a horizontal plane about an axis passing through the centre. If Y is the Young’s modulus for steel, find the extension in the length of the rod.

Answer:

Exemplar Solutions Class 11 Physics Chapter 9 - 7

T(r) and T(r+dr) are the tensions that act as an external force to the rod at points A and B.

T(r+dr)-T(r) is the centrifugal force on the element due to the tension difference

dr = dm.rω2 is the centripetal force due to rotation on the element

When the below equation is integrated,

Exemplar Solution Physics Class 11 Chapter 9 Img 7

We get the extension in the rod from both sides as:

Exemplar Solution Physics Class 11 Chapter 9 Img 6

9.27. An equilateral triangle ABC is formed by two Cu rods AB and BC, and one Al rod. It is heated in such a way that the temperature of each rod increases by ∆T. Find the change in the angle ABC.

Answer:

Exemplar Solutions Class 11 Physics Chapter 9 - 8

Trigonometry is used for determining the change in the angle ABC

Exemplar Solution Physics Class 11 Chapter 9 Img 5

When the above equation is differentiated, the change in the angle ABC is given as

Exemplar Solution Physics Class 11 Chapter 9 Img 4

9.28. In nature, the failure of structural members usually results from large torque because of twisting or bending rather than due to tensile or compressive strains. This process of structural breakdown is called buckling, and in cases of tall cylindrical structures like trees, the torque is caused by its own weight bending the structure. Thus the vertical through the centre of gravity does not fall within the base. The elastic torque caused because of this bending about the central axis if the tree is given by
Exemplar Solution Physics Class 11 Chapter 9 Img 65. Y is the Young’s modulus, r is the radius of the trunk, and R is the radius of curvature of the bent surface along the height of the trees containing the centre of gravity. Estimate the critical height of the trees for a given radius of the trunk.

Answer:

Exemplar Solutions Class 11 Physics Chapter 9 - 9

Using Pythagoras theorem,

R2 = (R – d)2 + (h/2)2

Solving the equation, we get d as

d = h2/8R

W0 is the weight of the trunk per unit volume

The weight of the trunk is = (Volume)(W0)

Substituting the values for volume and weight, we can calculate the critical height, h as

h = [2Y/W0]1/3 r2/3

9.29. A stone of mass m is tied to an elastic string of negligible mass and spring constant k. The unstretched length of the string is L and has negligible mass. The other end of the string is fixed to a nail at point P. Initially, the stone is at the same level as point P. The stone is dropped vertically from point P.

a) find the distance y from the top when the mass comes to rest for an instant, for the first time

b) what is the maximum velocity attained by the stone in this drop?

c) what shall be the nature of the motion after the stone has reached its lowest point?

Answer:

Exemplar Solutions Class 11 Physics Chapter 9 - 10

PE of stone = mechanical energy of string

mgy = ½ K(y-L)2

Where K is the spring constant

L is the length of the string

Solving the above equation, we get

Ky2 – 2(KL + mg)y + KL2 = 0

Using the above equation, we can determine the distance y from the top when the mass comes to rest for an instant

D = b2 – 4ac

Where a = K, b = -2(KL +mg) and c = KL2

Substituting the values we get

Exemplar Solution Physics Class 11 Chapter 9 Img 3

Therefore, y is solved as:

Exemplar Solution Physics Class 11 Chapter 9 Img 2

b) When the velocity is maximum, acceleration is zero, and therefore the force is also zero.

Let v be the maximum velocity of the stone.

The maximum velocity attained by the stone is determined with the help of the law of conservation of energy

PE lost by the stone from p to Q’ = KE of the stone + PE gained by the string

mg (L + x) = 1/2 mv2 + 1/2 Kx2

Solving the above equation gives maximum velocity v as

Exemplar Solution Physics Class 11 Chapter 9 Img 1

c) The nature of the motion after the stone has reached its lowest point is z0

z0 = [L + mg/K]


 

Also Access 
NCERT Solutions for Class 11 Physics Chapter 9
CBSE Notes for Class 11 Physics Chapter 9

 

Why Opt for BYJU’S?

BYJU’S provides you with accurate study materials, notes, sample papers, MCQs, short and long answer questions, exemplar problems and worksheets. These study resources will assist you in preparing well to face the Class 11 annual examinations and Engineering and Medical entrance examinations confidently.

Comments

Leave a Comment

Your Mobile number and Email id will not be published.

*

*

close
close

BOOK

Free Class