To study different parts of a compound microscope.
What is a compound microscope?
Real and magnified images of minuscule particles or objects can be achieved using a combination of lenses. A compound microscope is an intricate gathering of a combination of lenses that renders a highly maximized and magnified image of microscopic living entities and other complex details or tissues and cells.
Parts Of Compound Microscope
The parts of the compound microscope can be categorized into:
- Mechanical parts
- Optical parts
(A) Mechanical Parts of a Compound Microscope
1. Foot or base
It is a U-shaped structure and supports the entire weight of the compound microscope.
It is a vertical projection. This stands by resting on the base and supports the stage.
The entire microscope is handled by a strong and curved structure known as the arm.
The flat and rectangular plate that is connected to the arm’s lower end is called the stage. The specimen is placed on the stage for studying and examining the various features. The centre of the stage has a hole through which light can pass.
5. Inclination joint
It is a joint, wherein the arm is fastened to the compound microscope’s pillar. The microscope can be tilted using the inclination joint.
The upper part of the stage is connected to two clips. The slide can be held in its position with the help of the clips.
The diaphragm is fastened below the stage. It controls and adjusts the intensity of light that passes into the microscope. The diaphragm can be of two types:
- Disc diaphragm
- Iris diaphragm
8. Nose piece
The nose piece is circular and a rotating metal part that is connected to the body tube’s lower end. The nose piece has three holes wherein the objective lenses are embedded.
9. Body tube
The upper part of the arm of the microscope comprises a hollow and tubular structure known as the body tube. The body tube can be shifted down and up using the adjustment knobs.
10. Fine adjustment knob
It is the smaller knob, which is used for sharp and fine focusing of the object. For accurate and sharp focusing, this knob can be used.
11. Coarse adjustment knob
It is a large knob that is used for moving the body tube down and up for bringing the object to be examined under exact focus.
(B) Optical Parts of Compound Microscope
1. Eyepiece lens or Ocular
At the top of the body tube, a lens is planted which is known as the eyepiece. On the rim of the eyepiece, there are certain markings such as 5X, 10X, 15X, etc. These indicate the magnification power. The object’s magnified image can be observed with the help of an eyepiece.
A mirror is found attached wither to the pillar or the lower end of the arm. It consists of a concave mirror on one side and a plain mirror on the other side. It can be used for reflection of light rays into the microscope.
3. Objective lenses
At the bottom of the body tube, there are two objective lenses, which are connected to the revolving nose piece. The three objective lenses are as follows:
- Oil immersion objective – 100X
- High power objective – 45X
- Low power objective – 10X
Working Mechanism Of The Compound Microscope
- View into the eyepiece. Rearrange the mirror such that adequate light passes into the microscope.
- The mirror, lenses, stage, and slides should be cleared of dust and be clean.
- Place the slide in the middle of the stage.
- Firmly secure the slide with clips at two edges of the slide to ensure that the slide cannot move.
- The nose piece is adjusted in such a way that the low power objective is aligned with the object of focus placed on the slide.
- The coarse adjustment knob can be shifted upwards or downwards such that the slide is well under focus.
- Turn the fine adjustment knob by moving upwards or downwards to get a clear and sharp image of the object under focus.
- All minute details of the object are observed under low power objective. Necessary diagrams are sketched.
- The nose piece is now turned to bring the high power objective aligning with the object. The fine adjustment knob is tuned as much as possible to get a bright and precise view of the object.
- In high power, the details of the object are observed. Draw the necessary diagrams. The coarse adjustment knob should not be used when the object is being examined in high power as it can crush the slide.
- The objective lenses and eyepiece should be cleaned with the help of silk cloth and cleaning liquid before using.
- The microscope should not be tilted when working, using it.
- When an object needs to be studied, focus on low power objective first and then move to high power.
- The lower power needs to be left in place after all observations are completed.
- When focusing, care needs to be taken to ensure that the objective lens never strikes the stage or the slide.
- Only the fine adjustment knob should be used when the high power objective is employed.
- Cover slip should always be used to cover well-mount preparations before observation under the microscope is made.
- Do not dismantle the microscope.
- When carrying the microscope, always use both hands.
- Try to place it in a box after using the microscope.
- The concave part of the mirror should be used under dim light.
- Oil immersion lens should never be used without the use of oil.
Learn biological concepts and experiments by registering at BYJU’S.
|Early Experiments On Photosynthesis|