When switch S is closed magnetic field lines passing through Q increases in the direction from right to left. So, according to Lenz’s law... View Article
In a current-carrying conductor, by varying the electric current, the magnetic field is generated. The direction of the magnetic field generated... View Article
The self-inductance of a coil is defined as the ratio of self-induced emf to the rate of change of current in the coil. The unit used for... View Article
The different ways to induce current in a coil are as follows: 1. If a coil is moved rapidly between the two poles of a horse-shoe magnet, then... View Article
Since all field lines are going out from (iii) so the net flux is largest in this case. In case (i) and (ii) some of the field lines are going in... View Article
If a dish is kept at an orientation with a marble placed on it and if the marble in figure is displaced slightly, it would rattle about for a... View Article
On heating, the copper strip will suffer greater elongation and hence the bimetal strip will bend with the steel strip on the concave side. ... View Article
The distance covered = area under the curve                                        = (1/2) x 4 x 4 = 8 m... View Article
A since upward direction is given as positive the downward direction will be negative. All throughout the acceleration remains -9.8m/s2. A person... View Article
Momentum is mass times velocity, and the mass is not given. However, the truck would have a larger momentum if the mass of the truck were more... View Article
The boy has to apply a force in the upward direction, to stop it. If you apply a downward force, the trolley will further slide down and will not stop.... View Article
Earthing is done by providing an earth wire from the device to the ground.  if an earth wire is provided, it ensures a very low resistance path... View Article