A binary number system is one of the four types of number system. In computer applications, where binary numbers are represented by only two symbols or digits, i.e. 0 (zero) and 1(one). The binary numbers here are expressed in the base2 numeral system. For example, (101)_{2} is a binary number. Each digit in this system is said to be a bit. Learn about the number system here.
Table of Contents: 
Number System is a way to represent the numbers in the computer architecture. There are four different types of the number system, such as:
 Binary number system (base 2)
 Octal number system (base 8)
 Decimal number system(base 10)
 Hexadecimal number system (base 16).
In this article, let us discuss what is a binary number system, conversion from one system to other systems, table, positions, binary operations such as addition, subtraction, multiplication, and division, uses and solved examples in detail.
What is a Binary Number System?
Binary Number System: According to digital electronics and mathematics, a binary number is defined as a number that is expressed in the binary system or base 2 numeral system. It describes numeric values by two separate symbols; 1 (one) and 0 (zero). The base2 system is the positional notation with 2 as a radix.
The binary system is applied internally by almost all latest computers and computerbased devices because of its direct implementation in electronic circuits using logic gates. Every digit is referred to as a bit.
What is Bit in Binary Number?
A single binary digit is called a “Bit”. A binary number consists of several bits. Examples are:
 10101 is a fivebit binary number
 101 is a threebit binary number
 100001 is a sixbit binary number
Facts to Remember:

Binary Numbers Table
Some of the binary notations of lists of decimal numbers from 1 to 30, are mentioned in the below list.
Number  Binary Number  Number  Binary Number  Number  Binary Number 
1  1  11  1011  21  10101 
2  10  12  1100  22  10110 
3  11  13  1101  23  10111 
4  100  14  1110  24  11000 
5  101  15  1111  25  11001 
6  110  16  10000  26  11010 
7  111  17  10001  27  11011 
8  1000  18  10010  28  11100 
9  1001  19  10011  29  11101 
10  1010  20  10100  30  11110 
How to Calculate Binary Numbers
For example, the number to be operated is 1235.
Thousands  Hundreds  Tens  Ones 
1  2  3  5 
This indicates,
1235 = 1 × 1000 + 2 × 100 + 3 × 10 + 5 × 1
Given,
1000  = 10^{3} = 10 × 10 × 10 
100  = 10^{2} = 10 × 10 
10  = 10^{1} = 10 
1  = 10^{0} (any value to the exponent zero is one) 
The above table can be described as,
Thousands  Hundreds  Tens  Ones 
10^{3}  10^{2}  10^{1}  10^{0} 
1  2  3  5 
Hence,
1235 = 1 × 1000 + 2 × 100 + 3 × 10 + 5 × 1
= 1 × 10^{3} + 2 × 10^{2} + 3 × 10^{1} + 5 × 10^{0}
The decimal number system operates in base 10, wherein the digits 09 represent numbers. In binary system operates in base 2 and the digits 01 represent numbers, and the base is known as radix. Put differently, and the above table can also be shown in the following manner.
Thousands  Hundreds  Tens  Ones  
Decimal  10^{3}  10^{2}  10^{1}  10^{0} 
Binary  2^{3}  2^{2}  2^{1}  2^{0} 
We place the digits in columns 10^{0}, 10^{1} and so on in base 10. When there is a need to put a value higher than 9 in the form of 10^{(n+1)} for instance, to add 10 to column 10^{0}, you need to add 1 to the column 10^{1}.
We place the digits in columns 2^{0}, 2^{1} and so on in base 2. To place a value that is higher than 1 in 2^{n}, you need to add 2^{(n+1)}. For instance, to add 3 to column 2^{0}, you need to add 1 to column 2^{1}.
Position in Binary Number System
In the Binary system, we have ones, twos, fours etc…
For example 1011.110
It is shown like this:
1 × 8 + 0 × 4 + 1 × 2 + 1 + 1 × ½ + 1 × ¼ + 0 × 1⁄8
= 11.75 in Decimal
To show the values greater than or less than one, the numbers can be placed to the left or right of the point.
For 10.1, 10 is a whole number on the left side of the decimal, and as we move more left, the number place gets bigger (Twice).
The first digit on the right is always Halves ½ and as we move more right, the number gets smaller (half as big).
In the example given above:
 “10” shows ‘2’ in decimal.
 “.1” shows ‘half’.
 So, “10.1” in binary is 2.5 in decimal.
Binary Arithmetic Operations
Like we perform the arithmetic operations in numerals, in the same way, we can perform addition, subtraction, multiplication and division operations on Binary numbers. Let us learn them one by one.
Binary Addition
Adding two binary numbers will give us a binary number itself. It is the simplest method. Addition of two singledigit binary number is given in the table below.
Binary Numbers  Addition  
0  0  0 
0  1  1 
1  0  1 
1  1  0; Carry →1 
Let us take an example of two binary numbers and add them.
For example: Add 1101_{2} and 1001_{2}.
Solution:
Binary Subtraction
Subtracting two binary numbers will give us a binary number itself. It is also a straightforward method. Subtraction of two singledigit binary number is given in the table below.
Binary Numbers  Subtraction  
0  0  0 
0  1  1; Borrow 1 
1  0  1 
1  1  0 
Let us take an example of two binary numbers and subtract them.
Example: Subtract 1101_{2,} and 1010_{2}.
Solution: 1101_{2 }– 1010_{2} = 0011_{2}
Binary Multiplication
The multiplication process is the same for the binary numbers as it is for numerals. Let us understand it with example.
Example: Multiply 1101_{2} and 1010_{2}.
Binary Division
The binary division is similar to the decimal number division method. We will learn with an example here.
Example: Divide 1010_{2} by 10_{2}
Uses of Binary Number System
Binary numbers are commonly used in computer applications. All the coding and languages in computers such as C, C++, Java, etc. use binary digits 0 and 1 to write a program or encode any digital data. The computer understands only the coded language. Therefore these 2digit number system is used to represent a set of data or information in discrete bits of information.
Problems and Solutions
Let us practice some of the problems for better understanding:
Question 1: What is binary number 1.1 in decimal?
Solution:
Step 1: 1 on the lefthand side is on the one’s position, so it’s 1.
Step 2: The one on the righthand side is in halves, so it’s
1 × ½
Step 3: so, 1.1 = 1.5 in decimal.
Question 2: Write 10.11_{2} in Decimal?
Solution:
10.11 = 1 x (2)^{1} + 0 (2)^{0} + 1 (½)^{1} + 1(½)^{2}
= 2 + 0 + ½ + ½
= 2.75
So, 10.11 is 2.75 in Decimal.
Keep visiting BYJU’S to explore and learn more such Mathrelated topics in a fun and engaging way.
Frequently Asked Questions – FAQs
What is a binary number system?
What is a bit?
How to convert a decimal number into a binary number? Give an example.
13 ÷ 2: 6 and remainder 1
6 ÷ 2: 3 and remainder 0
3 ÷ 2: 1 and remainder 1
1 ÷ 2: 0 and remainder 1
Now we take the bits from the last remainder to first remainder, i.e.(MSB to LSB). Hence,
13_{10} = 1101^{2}
It was very helpful thanks
Thank you. I am satisfied.