What Are Energy Bands?

Energy Bands Description

In gaseous substances, the arrangement of molecules is spread apart and are not so close to each other. In liquids, the molecules are closer to each other. But, in solids, the molecules are closely arranged together, due to this atoms of molecules tend to move into the orbitals of neighbouring atoms. Hence, the electron orbitals overlap when atoms come together.

In solids, several bands of energy levels are formed due to the intermixing of atoms in solids. We call these set of energy levels as energy bands.

Formation of Energy Bands

In an isolated atom, the electrons in each orbit possess definite energy. But, in the case of solids, the energy level of the outermost orbit electrons is affected by the neighbouring atoms.

When two isolated charges are brought close to each other, the electrons in the outermost orbit experience an attractive force from the nearest or neighbouring atomic nucleus. Due to this reason, the energies of the electrons will not be at the same level, the energy levels of electrons are changed to a value which is higher or lower than that of the original energy level of the electron.

The electrons in the same orbit exhibit different energy levels. The grouping of these different energy levels is known as the energy band.

However, the energy of the inner orbit electrons is not much affected by the presence of neighbouring atoms.

Classification of Energy Bands

Valence Band

The electrons in the outermost shell are known as valence electrons. These valence electrons contain a series of energy levels and form an energy band known as the valence band. The valence band has the highest occupied energy.

Conduction Band

The valence electrons are not tightly held to the nucleus due to which a few of these valence electrons leave the outermost orbit even at room temperature and become free electrons. The free electrons conduct current in conductors and are therefore known as conduction electrons. The conduction band is one that contains conduction electrons and has the lowest occupied energy levels.

Forbidden Energy Gap

The gap between the valence band and the conduction band is referred to as the forbidden gap. As the name suggests, the forbidden gap doesn’t have any energy and no electrons stay in this band. If the forbidden energy gap is greater, then the valence band electrons are tightly bound or firmly attached to the nucleus. We require some amount of external energy that is equal to the forbidden energy gap.

The figure below shows the conduction band, valence band and the forbidden energy gap.

Energy Bands in Insulators, Conductors & Semiconductors

Conductors

Gold, Aluminium, Silver, Copper, all these metals allow an electric current to flow through them.

There is no forbidden gap between the valence band and conduction band which results in the overlapping of both the bands. The number of free electrons available at room temperature is large.

Insulators

Glass and wood are examples of the insulator. These substances do not allow electricity to pass through them. They have high resistivity and very low conductivity.

The energy gap in the insulator is very high up to 7eV. The material cannot conduct because the movement of the electrons from the valence band to the conduction band is not possible.

Semiconductors

Germanium and Silicon are the most preferable material whose electrical properties lie in between semiconductors and insulators. The energy band diagram of semiconductors is shown where the conduction band is empty and the valence band is completely filled but the forbidden gap between the two bands is very small that is about 1eV. For Germanium, the forbidden gap is 0.72eV and for Silicon, it is 1.1eV. Thus, semiconductor requires small conductivity.

Energy Band Theory

According to Bohr’s theory, every shell of an atom contains a discrete amount of energy at different levels. Energy band theory explains the interaction of electrons between the outermost shell and the innermost shell. Based on the energy band theory, there are three different energy bands:

  1. Valence band
  2. Forbidden energy gap
  3. Conduction band

Frequently Asked Questions – FAQs

Q1

The valence band and the conduction band overlap in _____.

The valence band and the conduction band overlap in conductors.
Q2

What is the energy that a valence electron should have to jump from the valence band to the conduction band called?

The valence electrons must have the same energy as an energy gap to jump from the valence band to conduction band.
Q3

What is the energy gap between the valence and conduction band termed as?

The energy gap between the valence and the conduction band is termed as energy gap.
Q4

The band in which the electrons move freely is known as _____.

The band in which the electrons move freely is known as the conduction band.
Q5

What is a band model?

Band theory models the behaviour of electrons in solids by postulating the existence of energy bands. It successfully uses a material’s band structure to explain the many physical properties of solids.

Stay tuned with BYJU’S for more such interesting articles. Also, register to “BYJU’S – The Learning App” for loads of interactive, engaging Physics-related videos and unlimited academic assistance.

Test Your Knowledge On What Are Energy Bands!

Comments

Leave a Comment Cancel reply

Your Mobile number and Email id will not be published.

*

*

  1. This is a very help full link . it helps me in my assignment. Thank you so much.

close
close

Play

&

Win