The terms velocity and speed give us an idea of how fast or slow an object is moving. Quite often, we come across situations where we need to identify which of the two or more objects is moving faster. One can easily tell the faster of the two if they are moving in the same direction on the same road. However, if their direction of motion is in the opposite direction, then it is difficult to determine the fastest. In such cases, the concept of velocity is helpful, which we shall be discussing in this article.
What is VelocityInitial and Final VelocityVelocity UnitsSpeed and VelocityExample of VelocityDifference between Speed and Velocity
What is Velocity?
The meaning of velocity of an object can be defined as the rate of change of the object’s position with respect to a frame of reference and time. It might sound complicated but velocity is basically speeding in a specific direction. It is a vector quantity, which means we need both magnitude (speed) and direction to define velocity. The SI unit of it is meter per second (ms^{-1}). If there is a change in magnitude or the direction in the velocity of a body the body is said to be accelerating.
Initial and Final Velocity
Initial velocity describes how fast an object travels when gravity first applies force on the object. On the other hand, the final velocity is a vector quantity that measures the speed and direction of a moving body after it has reached its maximum acceleration.
How to find the final velocity?
Finding the final velocity is simple with a few calculations and basic conceptual knowledge.
- Determine the object’s original velocity by dividing the time it took for the object to travel a given distance by the total distance. In the equation V = d/t, V is the velocity, d is the distance and t is the time.
- Determine the object’s acceleration by dividing the object’s mass by the force and multiply the answer by the time it took for it to accelerate. For example, if the object weighs 30 kg and has a force of 15 N applied to it, then the acceleration would be 4 m/s.
- Add the quantity obtained from Step 1 and Step 2 to obtain the final velocity. For example, if your initial velocity was 3 m/s and your object acceleration is 4 m/s, your final velocity is 7 m/s (3 + 4 = 7).
Constant Velocity
The motion with constant velocity is the simplest form of motion. We witness constant motion whenever an object slides over a horizontal, low friction surface (when a puck slides over a hockey rink.)
The above graph is a graph of displacement versus time for a body moving with constant velocity. The straight line in the graph can be algebraically represented as follows:
\(x=x_0+vt\)
In the equation, x_{0} is the displacement at time t, v is the constant velocity of the body \(v=\frac{dx}{dt}\).
Velocity Units
The SI unit of velocity is m/s (m⋅s−^{1}). Other units and dimensions of velocity are given in the table below.
Common symbols | v, v, \(\vec{v}\) |
SI unit | m/s |
Other units | mph, ft/s |
Dimension | LT^{−1} |
Speed and Velocity
Speed and velocity can be a little confusing for most of us. Well, the difference between speed and velocity is that speed gives us an idea of how fast an object is moving whereas velocity not only tells us its speed but also tells us the direction the body is moving in. We can define speed as a function of distance traveled whereas velocity is a function of displacement. Instantaneous velocity is the velocity of a body at any given time. Average velocity is the total displacement by total time and is given by v = △x△t where ∆x is the total displacement of the body and ∆t is the time. Average velocity is always less than or equal to that of average speed; this is because displacement can never be higher than the distance traveled but the distance traveled can be higher than that of displacement.
Example of Velocity
To understand the concept of instantaneous velocity and average velocity, let’s take this example. Jewel goes to school in her dad’s car every morning. Her school is 8 km from her home, and she takes 15 mins to travel, but when she looks at the speedometer on the dashboard of the car, it shows a different reading all the time. So, now how would she know her velocity?
Well, the average velocity of Jewel’s car could be found by:
For convenience, we have considered the car to move in a straight line, and we will convert all the units of time to hours. Therefore, 15 mins = 1560 = 0.25 hours.
Average velocity, v = △x△t
v = 8 km/0.25 hrs
v = 32 km/h
Now we see that even though the car may vary its speed, if it covers the same amount of distance in the same amount of time, every time its average velocity will remain the same.
Difference between Speed and Velocity
The detailed comparison in the tabular format is given below.
Speed is the quantitative measure of how quickly something is moving. | Velocity defines the direction of the movement of the body or the object. |
Speed is primarily a scalar quantity | Velocity is essentially a vector quantity |
It is the rate of change of distance | It is the rate of change of displacement |
Speed of an object moving can never be negative | The velocity of a moving object can be zero. |
Speed is a prime indicator of the rapidity of the object. | Velocity is the prime indicator of the position as well as the rapidity of the object. |
It can be defined as the distance covered by an object in unit time. | Velocity can be defined as the displacement of the object in unit time. |
Let’s summarize what we have learned:
- (a) This is a function of displacement.
- (b) We require both magnitude and direction to define velocity.
- (c) Instantaneous velocity is the velocity at any given moment of time, whereas average velocity is the total displacement divided by total time.
- (d) A changing velocity indicates acceleration.
Frequently Asked Questions
Can vector quantities be added algebraically?
Vector quantities cannot be added algebraically because they have directions along with magnitude. And directions cannot be added algebraically.
Give a general equation of velocity for a particle moving with velocity v such that \(\underset{v}{\rightarrow} = k(y\hat{i}+x\hat{j})\) where k is constant.
The general of a particle moving with velocity \(\underset{v}{\rightarrow} = k(y\hat{i}+x\hat{j})\) is given as y^{2} = x^{2} + constant
What is instantaneous speed?
Instantaneous speed is defined as the speed of an object at a specific moment of time.
What happens to the velocity and acceleration when a ball is thrown in the air?
Velocity and acceleration both increase when the ball is thrown in the air.
What is the purpose of the velocity-time graph?
The Velocity-time graph is used for explaining the constant acceleration of an object.
Very easy to learn
Yes it is very easy to learn from byju’s and it helps me alot to do my homework study ext.
Yes, it is very easy to learn from BYJU’S and it helps me a lot to do my homework and study for exams. Thanks 😊👍😊
Very easy to learn
It is soo amazing and fascinating to learn from byjus I really enjoys it and it is tooo much helpful for me in understanding the concepts clearly