Crop Production And Management Class 8 Notes

Crop

Plants of the same kind that are grown and cultivated as a source of food in a large cultivable land is called a crop.

To know more about Crops, visit here.

Types of Crops

Crops, which are grown in the winter season (from October to March) are called Rabi crops.
The crops, which are sown in the rainy season (from July to October) are called Kharif crops.

For more information on Food Production and Management, watch the below video

Preparation of Soil

  • Preparation of soil is the first step in cultivating crops for food production.
  • The soil is prepared for sowing the seeds of the crop.
  • This is carried out using various processes and tools.

To know more about Agriculture Soil Formation and Preparation, visit here.

For more information on Farming, watch the below video

Tilling or Ploughing

The process of loosening and turning of the soil is called tilling or ploughing and is done by using a plough.

Plough

  • A plough is a device that is used by farmers for different purposes, such as adding fertilizers, tilling and loosening the soil.
  • It is also used for adding fertilizers to the soil, removing weeds, scraping of soil, etc.
  • The ploughshare is the triangular iron strip.
  • A ploughshaft is the main part of the plough, which is made using a log of wood.
  • The other end of the shaft has a handle.
  • The other end is attached to a beam which is placed on the bull’s neck.
  • A wooden, traditional plough can be operated by a pair of ox and a man.
  • Nowadays, these wooden ploughs are being replaced by iron ploughs.

Crop Production and Management 1

Hoe

A hoe is a tool that is used to dig up soil to remove weeds and also loosen up the soil before planting a sapling.
Crop Production and Management 2

Cultivator

  • A cultivator is attached to the tractor and helps in loosening soil.
  • Cultivators are used instead of ploughs since they are faster.

Crop Production and Management 3

For more information on Irrigation, watch the below video

Sowing

  • Sowing is the process of planting seeds in the soil.
  • The seeds are sowed in the soil that is loosened by a cultivator or plough.

To know more about Sowing, visit here.

Quality of the Seeds

  • The quality of the seed is an important factor that determines the crop yield.
  • The selection of good seeds is done by putting the seeds in water.
  • The dead and damaged seeds become hollow and float on water, whereas the good seeds sink.

To know more about Selection and Sowing of Seeds, visit here.

Traditional Tools

  • Before the advent of modern agricultural machinery, traditional tools were used by farmers.
  • These include ploughs, shovels, scythes and pickaxes.
  • The traditional tool used to sow the seeds was like a funnel.
  • Once seeds were put into this funnel, they would go into 2-3 tubes having sharp ends.
  • The ends will pierce into the soil and place the seeds there.

Seed Drill

  • Seed drills are used for sowing with the help of tractors.
  • It ensures that seeds are sown uniformly, at a particular depth and are covered by soil after sowing.

Nursery

  • A nursery is a place where young plants and trees are grown for planting elsewhere.
  • Nursery acts as a repository of saplings.

Germination of Seeds

  • Germination of the seed happens when the seed is sown in the land and watered.
  • A plant starts to emerge from the seed and starts to grow.

Adding Manure and Fertilisers

Manure/Fertilizers

  • Manures and fertilizers are substances that are added to the soil to increase its fertility.
  • Manures are made by decomposition of organic substances, and fertilizers are made of inorganic chemicals.

Differences between Manure and Fertilizers

Fertilizer Manure
Fertilizer is an inorganic salt Manure is prepared from organic matter such as human waste, cow dung and farm waste, etc
Fertilizers are manufactured in factories Manures can be prepared on farms
Fertilizers are added in comparatively smaller quantities Manures need to be added in large quantities as the nutrient content is less
Fertilizers do not provide any humus to the soil Manures provide a lot of humus to the soil

To know more about Manure and Fertilizer, visit here.

Disadvantages of Using Fertilizers

  • Excessive use of fertiliser can cause pollution.
  • It can also change the pH of the soil in certain rare cases.

Leaving the Land Fallow

  • When land is left fallow for a certain period of time, the land replenishes its nutrients by itself.
  • This land can be used for agriculture again.

Crop Rotation

  • Crop rotation ensures that the same crop will not grow continuously and lead to the erosion of soil fertility.
  • By growing crops that require different sets of nutrients, we can ensure that soil fertility is restored.

Protecting from Weeds

Weeds

Weeds are undesirable plants that may grow naturally along with the crop.

  • Weeds compete with the crops by absorbing all the water, nutrients, space and light.

To know more about Weeds, visit here.

Tilling

  • Tilling is a process done before sowing of crops that helps in uprooting and killing weeds.

Manual Removal

  • Manual removal includes physical removal of weeds by uprooting them from the soil or chopping them off to ground level periodically.

Weedicides

  • Chemicals used to kill the weeds are known as weedicides.
  • They usually don’t damage the crop.

Harvesting

  • Harvesting is the process of cutting the crop after it is mature.

Methods of Harvesting

  • Harvesting is done by two methods.
  • First is the manual method, where a sickle is used.
  • Second is the mechanical method, where a huge machine called a harvester is used.

Threshing

  • Threshing is the process of loosening the grains from the chaff.
  • While it can be done manually, a machine is used that separates all the grain seeds these days.

Crop Production and Management 5

To know more about Threshing, visit here.

Winnowing

  • Winnowing is the process that separates grain seeds from the chaff using the help of the wind.
  • Due to the wind, the lighter chaff flies away, and the heavier grains fall down.

Crop Production and Management 4

To know more about Winnowing, visit here.

Storage

  • Storage of the grains is an important step in agriculture.
  • After harvesting steps, the ready grains are stored in granaries or silos.
  • The grains have to be stored in a dry place that does not have a rodent or fungal infestation.
  • Fumigation of storage places is carried out to make it free from microbes.

Granaries

  • Granaries are the place where freshly obtained food grains are stored.

To know more about Storage of Grains, visit here.

Animal Husbandry

  • Animal husbandry is the management and care of farm animals for milk, egg or meat.

To know more about Animal Husbandry, visit here.

At BYJU’S, learn more about crop production and management and other related topics, including class 8 Science notes.

Also Read:-

Crop Production Biotechnology in Agriculture

Frequently Asked Questions on CBSE Class 8 Science Notes Chapter 1 Crop Production and Management

Q1

What are the different types of irrigation methods?

The four main types of irrigation are Surface, Sprinkler, Drip and Subsurface.

Q2

What are biofertilizers?

Biofertilizers are living microbes that enhance plant nutrition by either mobilizing or increasing nutrient availability in soils. Various microbial taxa, including beneficial bacteria and fungi are currently used as biofertilizers, as they successfully colonize the rhizosphere, rhizoplane or root interior.

Q3

What is animal husbandry?

Animal husbandry is the branch of agriculture concerned with animals that are raised for meat, fibre, milk or other dairy products.

Comments

Leave a Comment Cancel reply

Your Mobile number and Email id will not be published.

*

*

  1. Helped me a lot

Tuition Center
Tuition Centre
free trial
Free Trial Class
Scholarship Test
Scholarship Test
Question and Answer
Question & Answer