Lever
Trending Questions
A lever works on the principle of _____
moments
velocity
acceleration
speed
Observe the given figure and calculate the resistance (R) offered by the nut when the effort of 45 N is applied.
140 N
135 N
120 N
160 N
The fixed point about which the lever turns in called ____
Effort
Load
Mass
Fulcrum
A force of 5 kgf is required to cut a metal sheet. A shear is used for cutting a metal sheet; its blade is 5 cm long while its handle is 10 cm long. What effort is needed to cut a sheet?
5.0 kgf
2.5 kgf
2.0 kgf
3.0 kgf
चित्र में दर्शाए अनुसार संयोजित एक जैसी तीन स्प्रिंग तुलाओं पर विचार कीजिए। यदि स्प्रिंग तुलाओं A, B व C में दर्शाए गए पाठ्यांक क्रमशः FA, FB व FC हैं। तब सही सम्बन्ध का चयन कीजिए।
- FA > FB > FC
- FA = FC > FB
- FA < FB > FC
- FA = FB = FC
In a Roman steelyard, the length of the scale is 1.5 m and the weight of the rider is 20 N. The load is suspended 15 cm away from the point of suspension, then the maximum load that can be measured by it is _________. (Take g = 10 m s-2)
20 kg wt
20 N
2 N
2 kg wt
- position
- work done
- speed
- acceleration
-
The ball will experience no drag. -
The direction of the drag will always be upward. -
The direction of the drag will always be downward. - Initially, the direction of drag will be upward and after some time the direction will be downwards.
- Less than its weight
- Not equal to its weight
- Equal to its weight and in the same direction.
- Equal to its weight and opposite in direction.
- +6+6√3 cm
- +6−6√3 cm
- −6+6√3 cm
- 6√3 cm
- work done
- acceleration
- speed
- position
- gravitational
- muscular
- magnetic