Meter Bridge
Trending Questions
Q. In a metre bridge, the gaps are closed by resistances P and Q, P being less than Q. A balance is obtained when the jockey makes contact at a point of bridge wire 40 cm from one end. On shunting the coil Q with a resistance of 50 Ω, the balance point is moved through 10 cm. The resistance P and Q are
- 25 Ω, 16.67 Ω
- 16.67 Ω, 25 Ω
- 10 Ω, 25 Ω
- 8 Ω, 12 Ω
Q. In a metre bridge experiment with resistance R1 in the left gap and a resistance S in the right gap, balance point is obtained at 40 cm from zero end. With another resistance R2 in left gap with same S in right gap, the balance point is obtained at 50 cm. If R1 and R2 are put in parallel in the left gap without changing S, the balancing length will be
- 28.5 cm
- 32.5 cm
- 82.5 cm
- 42.5 cm
Q. On interchanging, the resistances, the balance point of a meter bridge shifts to left by 10 cm. The resistance of their series combination is 1 kΩ. How much was the resistance on the left slot before interchanging the resistances?
- 910 Ω
- 990 Ω
- 505 Ω
- 550 Ω
Q. Two equal resistances are connected in the gaps of a metre bridge. If the resistance in the left gap is increased by 10% the balancing point shifts by
- 10% to right
- 10% to left
- 9.6% to right
- 4.8% to right
Q. In a meter bridge, the gaps are closed by two resistances P and Q and the balance point is obtained at 40 cm.When Q is shunted by a resistance of 15Ω, the balance point shifts to 66.67 cm. The values of P and Q are
- 20Ω, 30Ω
- 10Ω, 15Ω
- 5Ω, 7.5Ω
- 103Ω, 5Ω
Q. In meter bridge the balancing length from left and when standard resistance of 1Ω is in right gap is found to be 20 cm. The value of unknown resistance is
- 0.25Ω
- 0.4Ω
- 0.5Ω
- 4Ω