CameraIcon

SearchIcon

MyQuestionIcon

2

You visited us 2 times! Enjoying our articles? Unlock Full Access!

Built Up Columns - Lacing

A 55 ISF 12 m...

Question

A 55 ISF 12 mm is used as lacing flat. The minimum radius of gyration will be _______.

Open in App

Solution

$r_{min} of lacing flat = \frac{t}{\sqrt{12}} = \frac{12}{\sqrt{12}}$
$= \sqrt{12} = 3.46 m m$

Suggest Corrections

thumbs-up

0

Similar questions

Q. Two channel sections are connected by a single lacing system as shown in figure. The minimum thickness of lacing flat (Nearest integer) will be _____ mm.

(Assume lacing angle as 45^{\circ})

Q. A steel column in a multi-storeyed building carries an axial load of 200 N. It is built up of 2 ISMC 350 channels connected by lacing. The effective length and thickness of lacing flat is 420 mm and 12 mm respectively. The slenderness ratio of lacing flat is ______.

Q. Four angles of ISA 90 x 90 x 10 mm are used for a built up column as shown in the fig. The column is subjected to a compressive force of 1200 kN. If a flat of 80 x 10 mm size is used as lacing bar for the single lacing system and inclination of the lacing bar is 45

^{\circ}

with vertical, then the each lacing bar is designed for an axial force of _________.

Q. In a single laced column system, a tie plate of length 300 mm is used at the ends of the column. The minimum thickness of the plate should be _______.

Q. The maximum length of a tension member with minimum radius of gyration 50 mm carrying load reversals due to loads other than wind or earthquake forces as per IS 800 is_____ m.

View More

Join BYJU'S Learning Program

similar_icon

Related Videos

lock

Built Up Columns - Lacing

OTHER

Watch in App

explore_more_icon

Explore more

Built Up Columns - Lacing

Join BYJU'S Learning Program

CrossIcon