Answer the following:

(a) You are given a thread and a metre scale. How will you estimate the diameter of the thread?

(b) A screw gauge has a pitch of 1.0 mm and 200 divisions on the circular scale. Do you think it is possible to increase the accuracy of the screw gauge arbitrarily by increasing the number of divisions on the circular scale?

(c) The mean diameter of a thin brass rod is to be measured by vernier callipers. Why is a set of 100 measurements of the diameter expected to yield a more reliable estimate than a set of 5 measurements only?

Open in App

Solution

(a) Wrap the thread on a uniform smooth rod in such a way that the coils thus formed are very close to each other. Measure the length of the thread using a metre scale. The diameter of the thread is given by the relation,

(b) It is not possible to increase the accuracy of a screw gauge by increasing the number of divisions of the circular scale. Increasing the number divisions of the circular scale will increase its accuracy to a certain extent only.

(c) A set of 100 measurements is more reliable than a set of 5 measurements because random errors involved in the former are very less as compared to the latter.

Suggest Corrections

Similar questions

Q. Answer the following : (a)You are given a thread and a metre scale. How will you estimate the diameter of the thread ? (b)A screw gauge has a pitch of 1.0 mm and 200 divisions on the circular scale. Do you think it is possible to increase the accuracy of the screw gauge arbitrarily by increasing the number of divisions on the circular scale ? (c) The mean diameter of a thin brass rod is to be measured by vernier callipers. Why is a set of 100 measurements of the diameter expected to yield a more reliable estimate than a set of 5 measurements only ?

The pitch of a screw gauge is 1 mm and there are 100 division on the circular scale. A students measures a diameter of a wire using this screw gauge and he gets main scale reading as 5 mm and circular divisions as 25. If the screw gauge has positive zero error $0.03 m m$ , the correct value of diameter will be

While performing an experiment with a screw gauge to measure the diameter of a wire, a student finds that when the two jaws of the screw gauge are in contact with each other, the zero of the circular scale lies 5 divisions above the line of graduation. The pitch of the screw gauge is 1 mm and has 100 divisions on its circular scale. While measuring the diameter of the wire, 4 linear scale divisions are clearly visible while $63^{r d}$ division on the circular scale coincides with the reference line. What is the diameter of the wire?

Q. The pitch of a screw gauge is

2 mm

and there are

100

divisions on the circular scale. In measuring the diameter of a sphere, there are

6

divisions on the linear scale and

40

divisions on circular scale coinciding with the reference line. The diameter of the sphere is:

Q. The pitch of a screw gauge is 1 mm and there are 100 divisions on the circular scale. In measuring the diameter of a sphere there are six divisions on the linear scale and forty divisions on circular scale coincides with the reference line. Find the diameter of the sphere.

Join BYJU'S Learning Program