Question

Consider a Vernier calipers in which each $1cm$ on the main scale is divided into $8$ equal divisions and a screw gauge with $100$ divisions on its circular scale. In the Vernier callipers, $5$ divisions of the Vernier scale coincide with $4$ divisions on the main scale and in the screw gauge, one complete rotation of the circular scale moves it by two divisions on the linear scale. Then

Answer 1

Vernier Calipers:
$1cm$ is divided into $8$ divisions, $1$ main scale division is given as $\frac{1}{8}cm$
Given 5 Vernier scale coincides with $4$ main scale divisions
$5V.S.D=4M.S.D$
$L.C=$ $1M.S.D-\frac{4}{5}M.S.D$
$L.C=$ $1M.S.D-\frac{4}{5}M.S.D=\frac{1}{5}M.S.D=\frac{1}{40}cm$

Given pitch of Screw gauge is 2 times L.C. of V.S
$p=2\times \frac{1}{40}cm=\frac{1}{20}cm$
No. of divisions on circular scale $=100$
The least count of screw gauge is =$\frac{pitch}{no.ofdivisionsoncircularscale}$
$=\frac{\frac{1}{20}}{100}=0.0005cm=0.005mm$
Hence, option B is correct.

Given least count of the linear scale of the screw gauge is twice the least count of the Vernier calipers.
One complete rotation of the circular scale moves it by two divisions on the linear scale, so pitch is 2 times linear scale division of screw gauge,

Pitch $=2\times$ linear scale division of screw gauge $=4\times L.C$ of $V.S$ $=4\times \frac{1}{40}=\frac{1}{10}$

The least count of screw gauge is $\frac{pitch}{no.ofdivisionsoncircularscale}$
No. of divisions on circular scale $=100$
$L.C=\frac{\frac{1}{10}}{100}=0.001cm=0.01mm$
Option C is correct .
Hence, option B and C is correct.