MyQuestionIcon

1

You visited us 1 times! Enjoying our articles? Unlock Full Access!

Elastomer

Consider the ...

Question

Consider the following statements:
1. Reinforcement that is no longer required for flexure beyond a certain section, shall however be extended by d or 12 $ϕ$ . whichever is greater, before being curtailed.
2. Atleast half the bars should be bent up at the cut-off point.
3. The shear capacity at cut-off point should atleast be 1.5 times the shear force at that section.

Which of these statements are correct?

A

1 and 2

No worries! We‘ve got your back. Try BYJU‘S free classes today!

B

1 and 3

Right on! Give the BNAT exam to get a 100% scholarship for BYJUS courses

C

2 and 3

No worries! We‘ve got your back. Try BYJU‘S free classes today!

D

1, 2 and 3

No worries! We‘ve got your back. Try BYJU‘S free classes today!

Open in App

Solution

The correct option is B 1 and 3
As per IS : 456-2000,
(i) clause 26.2.3.1, for curtailment, reinforcement shall extend beyond the point at which it is no longer required to resist flexure for a distance equal to the effective depth of the member or 12 times the bar diameter whichever is greater except at simple supports or ends of cantilever.

(ii) clause 26.2.3.2, the shear at cut off point does not exceed two-thirds that permitted including the shear strength of web reinforcement provided.

Suggest Corrections

thumbs-up

1

Similar questions

Q. Consider the following statements dealing with flexural reinforcement to be terminated in the tension zone
1. The shear at the cut-off point not to exceed two-third of the otherwise permitted value.
2. Shear reinforcement is provided along each terminated bar overlapping three-fourth of the appropriate distance from the cut-off point.
3. For 36 mm and smaller bars, the continuing bars shall provide double the area required for flexure at the cutoff and shear does not exceed three-fourth of the permitted value

Which of these statements is/are correct?

Q. The distance between theoretical cut-off point and actual cut-off point in respect of the curtailment of reinforcement of reinforced concrete beams should not be less than

Q. Consider the following statements:
1. At a point of inflection, the embedment length
need not exceed the development length L

_{σ}

2. The condition that

L_{σ} (\frac{M_{1}}{V} + L_{0})

need not be checked for negative reinforcement.

At least one-third of the total negative
reinforcement provided must extend beyond
the point of inflection for a distance not less
than 'd' or 12

ϕ

or clear-span whichever is
larger.

Which of these statements are correct?

Q. A singly reinforced concrete beam has rectangular section 230 mm wide x 460 mm effective depth. At a section under consideration there are two 16 mm diameter bent-up bars at

45^{o}

and 6 mm diameter two legged stirrups at a spacing of 200 mm centre to centre. The grade of concrete is M20. The reinforcement is HYSD 415. The design shear strength of concrete is 0.6 N/mm

^{2}

and maximum shear stress is 2.8 N/mm

^{2}

. Using limit state method, determine the value of factored shear force to be permitted at the section.

Q. Consider the following statements related piercing and blanking
1. Shear on the punch reduces the maximum cutting force
2. Shear increases the capacity of the press needed
3. Shear increases the life of the punch
4. Total energy needed to make the cut remains unaltered due to provision of shear.
Which of the above statements are correct?

View More

Join BYJU'S Learning Program

similar_icon

Related Videos

lock

Nature of Intermolecular Forces

CHEMISTRY

Watch in App

explore_more_icon

Explore more

Standard XII Chemistry

Join BYJU'S Learning Program

CrossIcon