The correct option is
A 98,329When minimum value of
m is selected, it has to be less than
(M=2 kg) block. Then
m has a tendency to slip upwards and
M to slip downwards. Hence, friction will act on the two blocks as shown in figure.
Taking components perpendicular to the incline for the mass
M N=Mgcos45∘=Mg√2 Taking components parallel to the incline
T+f=Mgsin45∘=Mg√2 or
T=Mg√2−f As it is a case of limiting equilibrium,
f=μsN or
T=Mg√2−μsN=Mg√2(1−μs)....(i) Now consider the other block as the system. The forces acting on this block are shown in figure
(b) Taking components perpendicular to the incline
N′=mgcos45∘=mg√2 Taking components parallel to the incline
T=mgsin45∘+f′ =mg√2+f′ As it is the case of limiting equilbrium,
f′=usN′=usmg√2 Thus,
T=mg(1+μs)√2........(ii) From
(i) and
(ii) m(1+μs)=M(1−μs).......(iii) or,
m=(1−μs1+μs)M=(1−0.281+0.28)×2 kg =98 kg When maximum possible value of
m is selected, the directions of friction forces are reversed becasue
m has the tendency to slip down and
2 kg block to slip up.
The force equations for the two blocks will be:
T=Mg√2(1+μs)−−−(iv) &
T=mg√2(1−μs)−−−(v) ⇒M(1+μs)=m(1−μs)−−−(vi) Equating the two, the maximum value of
m can be obtained from by putting
μ=0.28 Thus, the maximum value of
m is
m=1+0.281−0.28×2 kg=329 kg