Give the reason for the following: Steel axles of machines are made to run in brass sockets or bearings.

Open in App

Solution

The friction taking place in bearings is rolling friction.
The rolling friction is always less than other types of friction.
The friction is the main reason for the wear and tear in machines.
To minimize the wear and tear due to friction bearings are used.

Suggest Corrections

Similar questions

Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 9.13. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongation of the steel and the brass wires.

Give reason for the following.

a. Hydronium ions are always in the form H₃O⁺

b. Buttermilk spoils if kept in a copper or brass container.

Q. Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires. Given youngs modulus of steel =

2 \times 10^{- 11} P a

and that of brass is

0.9 \times 10^{- 11} P a

Q. Assertion :Steel and brass are more elastic than copper and aluminium. Reason: That's why they are preferred in heavy-duty machines and in structural designs.

Q. Two wires of diameter

0.25 c m

, one made of steel and the other made of brass are loaded as shown in

figure

. The unloaded length of steel wire is

1.5 m

and that of brass wire is

1.0 m

. Compute the elongations of the steel and the brass wires.

Join BYJU'S Learning Program

Give the reason for the following: Steel axles of machines are made to run in brass sockets or bearings.

The friction taking place in bearings is rolling friction.The rolling friction is always less than other types of friction.The friction is the main reason for the wear and tear in machines.To minimize the wear and tear due to friction bearings are used.

The friction taking place in bearings is rolling friction.
The rolling friction is always less than other types of friction.
The friction is the main reason for the wear and tear in machines.
To minimize the wear and tear due to friction bearings are used.