Match List-I (welding defects) with List-II (Causes) and select the correct answer using the codes given below the lists:

Lis-I List-II

A. Spatter 1. Damp electrodes

B. Distortion 2. Arc blow

C. Slag inclusion 3. Improper cleaning in multi pass welding

D. Porosity 4. Poor joint selection

Codes
$A B C D$

2413

No worries! We‘ve got your back. Try BYJU‘S free classes today!

2431

Right on! Give the BNAT exam to get a 100% scholarship for BYJUS courses

4213

No worries! We‘ve got your back. Try BYJU‘S free classes today!

4231

No worries! We‘ve got your back. Try BYJU‘S free classes today!

Open in App

Solution

The correct option is B $2431$
$2431$

Suggest Corrections

Similar questions

List - I	List - II
A. Cracking of weld metal	1. Excessive stresses
B. Cracking of base metal	2. High joint rigidity
C. Porosity	3. Failure to remove slag from previous deposit
D. Inclusions	4. Oxidation
	5. Excessive $H_{2}, O_{2}, N_{2}$ in the welding atmosphere

A B C D

\begin{matrix} List-I & List-II P.Centrifugal compressor & 1.Axial flow Q.Centrifugal pump & 2.Surging R.Pelton wheel & 3.Priming S. Kaplan turbine & 4.Pure impulse \end{matrix}

\begin{matrix} List-I & List-II P. SAW & 1. above 75mm Q. MIG welding. & 2: Less than 5mm R. TIG welding. & 3.5 to 30mm S. Electroslag welding. & 4. 30 to 75mm \end{matrix}

\begin{matrix} List-I & List-II P.Pelton Turbine & 1.Draft tube Q.Francis Turbine & 2.Manometric Head R.Kalpan Turbine & 3.Mixed Flow S.Centrifugal pump & 4.No cavitation \end{matrix}

Join BYJU'S Learning Program

Lis-I	List-II
A. Spatter	1. Damp electrodes
B. Distortion	2. Arc blow
C. Slag inclusion	3. Improper cleaning in multi pass welding
D. Porosity	4. Poor joint selection