book free class
wiz-icon
MyQuestionIcon
MyQuestionIcon
COMEDK Medical | 2013
Q. Oxygen is 16 times heavier than hydrogen. Equal volume of hydrogen and oxygen are mixed. The ratio of speed of sound in the mixture to that in hydrogen is :
  1. 23/17
  2. 2/17
  3. 8
  4. 1/8
COMEDK Engineering
View Solution
drop_down_image
Q. A vertical circular coil of radius 0.1 m and having 10 turns carries a steady current. When the plane of the coil is normal to the magnetic meridian, a neutral point is observed at the centre of the coil. If BH=0.314×104T, the current in the coil is :
  1. 0.5 A
  2. 0.25 A
  3. 2 A
  4. 1 A
COMEDK Engineering
View Solution
drop_down_image
Q. If two waves of same frequency and amplitude respectively on superposition produce a resultant disturbance of the same amplitude, the wave differ in phase by :
  1. zero
  2. 2π/3
  3. π/3
  4. π
COMEDK Engineering
View Solution
drop_down_image
Q. A magnet NS is suspended from a spring and when it oscillates, the magnet moves in and out of the coil C. The coil is connected to a galvanometer G. Then, as the magnet oscillates :
476759_3327084f20a24c7fa387220437f4f23f.png
  1. G shows no deflection
  2. G shows deflection to the left and right but amplitude steadily decreases.
  3. G shows deflection to the left and right with constant amplitude.
  4. G shows deflection on one side.
COMEDK Engineering
View Solution
drop_down_image
Q. Two bodies of masses 1 kg and 2 kg have equal momentum. Then, the ratio of their kinetic energies is:
  1. 3:1
  2. 1:1
  3. 1:3
  4. 2:1
COMEDK Engineering
View Solution
drop_down_image
Q. A rectangular coil of 300 turns has an average area of 25 cm×10 cm. The coil rotates with a speed of 50 cps in uniform magnetic field of strength 4×102T about an axis perpendicular to the field. The peak value of the induced emf is (in volt):
  1. 3π
  2. 300π
  3. 3000π
  4. 30π
COMEDK Engineering
View Solution
drop_down_image
Q. In an LCR circuit the potential difference between the terminal of the inductance is 60 V, between the terminals of the capacitor is 30 V and that between the terminals of the resistance is 40 V. The supply voltage will be equal to:
  1. 130 V
  2. 10 V
  3. 50 V
  4. 70 V
COMEDK Engineering
View Solution
drop_down_image
Q. An electron is accelerated through a potential difference of 45.5 volt. The velocity acquired by it is (in ms1) :
  1. 106
  2. zero
  3. 4×106
  4. 4×104
COMEDK Engineering
View Solution
drop_down_image
Q. The spectrum obtained from the chromosphere of the sun at the time of total solar eclipse is :
  1. continuous emission spectrum
  2. line emission spectrum
  3. band emission spectrum
  4. line absorption spectrum
COMEDK Engineering
View Solution
drop_down_image
Q. What is the dimensional formula of Inductance?
  1. [ML2TA2]
  2. [ML2T2A2]
  3. [ML2T1A2]
  4. [ML2T2A1]
COMEDK Engineering
View Solution
drop_down_image
Q. A bullet moving with a speed of 100ms1 can just penetrate two planks of equal thickness. Then, the number of such planks penetrated by the same bullet when the speed is doubled will be :
  1. 6
  2. 10
  3. 4
  4. 8
COMEDK Engineering
View Solution
drop_down_image
Q. The maximum current that can be measured by a galvanometer of resistance 40Ω is 10 mA. If it is converted into a voltmeter that can read upto 50 V. the resistance to be connected in series with the galvanometer (in ohms) is:
  1. 5040
  2. 4050
  3. 2010
  4. 4960
COMEDK Engineering
View Solution
drop_down_image
Q. When a body moves in a circular path, no work is done by the force since :
  1. the force is always away from the centre.
  2. force and displacement are perpendicular to each other.
  3. there is no displacement.
  4. there is no net force.
COMEDK Engineering
View Solution
drop_down_image
Q. A beam of light of wavelength 600 nm from a source falls on a single slit 1 mm wide and the resulting diffraction pattern is observed on a screen 2 m away. The distance between the first dark fringes on either side of the central bright fringe is:
  1. 2.4 mm
  2. 2.4 cm
  3. 1.2 mm
  4. 1.2 cm
COMEDK Engineering
View Solution
drop_down_image
Q. Absorption coefficient of an open window is :
  1. zero
  2. 1
  3. 0.5
  4. 0.25
COMEDK Engineering
View Solution
drop_down_image
Q. Heavy water is:
  1. compound of deutrium and oxygen
  2. water at 4C
  3. compound of heavy oxygen and heavy hydrogen
  4. water, in which soap does not lather
COMEDK Engineering
View Solution
drop_down_image
Q. The loudness and pitch of a sound note depend on :
  1. intensity and velocity
  2. frequency and velocity
  3. intensity and frequency
  4. frequency and number of harmonics
COMEDK Engineering
View Solution
drop_down_image
Q. Curie-Weiss law is obeyed by iron :
  1. at Curie temperature only.
  2. at all temperatures.
  3. below Curie temperature.
  4. above Curie temperature.
COMEDK Engineering
View Solution
drop_down_image
Q. A spherical drop of capacitance 1 μF is broken into 8 drops of equal radius. Then, the capacitance of each small drop is:
  1. 12 μF
  2. 8 μF
  3. 14 μF
  4. 18 μF
COMEDK Engineering
View Solution
drop_down_image
Q. SI unit of permitivity is:
  1. C2m2N2
  2. C2m2N1
  3. C1m2N2
  4. C2m2N1
COMEDK Engineering
View Solution
drop_down_image
Q. The difference between the apparent frequency of a source of sound as perceived by the observer during its approach and recession is 2% of the frequency of the source. If the speed of the sound in air is 300ms, the velocity of the source is :
  1. 1.5ms
  2. 12ms
  3. 6ms
  4. 3ms
COMEDK Engineering
View Solution
drop_down_image
Q. Three long straight wires A, B and C are carrying currents as shown in figure. Then the resultant force on B is directed :
476754_11e3376e08da4aba9ccb2cecf68c04fe.png
  1. towards A
  2. perpendicular to the plane of the paper and outward
  3. perpendicular to the plane of the paper and inward
  4. towards C
COMEDK Engineering
View Solution
drop_down_image
Q. An unknown resistance R1 is connected in series with a resistance of 10Ω. This combination is connected to one gap of a meter bridge while a resistance R2 is connected in the other gap. The balance point is at 50 cm. Now when the 10Ω resistance is removed, the balance point shifts to 40 cm. The value of R1 is (in ohms) :
  1. 10
  2. 20
  3. 60
  4. 40
COMEDK Engineering
View Solution
drop_down_image
Q. In the circuit shown, the internal resistance of the cell is negligible. The steady state current in the 2Ω resistor is :
476796.jpg
  1. 0.6 A
  2. 1.2 A
  3. 0.9 A
  4. 1.5 A
COMEDK Engineering
View Solution
drop_down_image
Q. A thread is tied slightly loose to a wire frame as in figure and the frame is diped into a soap solution and taken out. The frame is completely covered with the film. When the portion A is punctured with a pin, the thread :
476809.jpg
  1. becomes concave towards A
  2. becomes convex towards A
  3. either (a) or (b) depending on the size of A with respect to B
  4. remains in the initial position
COMEDK Engineering
View Solution
drop_down_image
Q. The nuclear reactor at Kaiga is a :
  1. research reactor
  2. fusion reactor
  3. breedor reactor
  4. power reactor
COMEDK Engineering
View Solution
drop_down_image
Q. Two equal forces (P each) act at a point inclined to each other at an angle of 1200. The magnitude of their resultant is:
  1. P/2
  2. P/4
  3. 2P
  4. P
COMEDK Engineering
View Solution
drop_down_image
Q. A man, standing between two cliffs, claps his hands and starts hearing a series of echoes at intervals of one second. If the speed of sound in air is 340ms1, the distance between the cliffs is :
  1. 680 m
  2. 1700 m
  3. 340 m
  4. 1620 m
COMEDK Engineering
View Solution
drop_down_image
Q. In Melde's experiment in the transverse mode, the frequency of the tuning fork and the frequency of the waves in the string are in the ratio :
  1. 1:1
  2. 1:2
  3. 4:1
  4. 2:1
COMEDK Engineering
View Solution
drop_down_image
Q. H-polaroid is prepared by:
  1. orienting herapathite crystal in the same direction in nitrocellulose.
  2. using them tourmaline crystals.
  3. stretching polyvinyl alcohol and then heated with dehydrating agent
  4. stretching polyvinyl alcohol and then impregnating with iodine
COMEDK Engineering
View Solution
drop_down_image