MyQuestionIcon

1

You visited us 1 times! Enjoying our articles? Unlock Full Access!

Design of One Way Slab

The main rein...

Question

The main reinforcement of a RC slab consists of 10 mm bars at 10 cm spacing. If it is desired to replace 10 mm bars by 12 mm bars, then the spacing of 12 mm bars should be

A

12cm

No worries! We‘ve got your back. Try BYJU‘S free classes today!

B

14 cm

No worries! We‘ve got your back. Try BYJU‘S free classes today!

C

14.40cm

Right on! Give the BNAT exam to get a 100% scholarship for BYJUS courses

D

16 cm

No worries! We‘ve got your back. Try BYJU‘S free classes today!

Open in App

Solution

The correct option is C 14.40cm
The horizontal distance between parallel main reinforcement bars shall not be more than three times the effective depth of solid slab or 300 mm whichever is smaller. The total reinforcement in the slab should remain same. By replacing 10 mm bars by 12 mm bars, the spacing will increase as

${(\frac{d_{2}}{d_{1}})}^{2} \times S_{1} = {(\frac{12}{10})}^{2} \times 10 = 14.4 c m$

Suggest Corrections

thumbs-up

4

Similar questions

Q. The main reinforcement of a R.C. slab consists of 10 mm bars at 100 mm spacing, if it is desired to replace the 10 mm bars by 12 mm bars, then the spacing of 12 mm bars should be

Q. List-I
A. For longitudinal reinforcement in columns of size 200 mm and less, with 12 mm diameter bars as longitudinal steel.
B. For longitudinal reinforcement in beams.
C. For longitudinal bars in slabs.
D. For longitudinal bars in columns of size more than 200 mm.
Lits-II
1. 40 mm or diameter of bar whichever is more
2. 15 mm or diameter of bar whichever is more
3. 25 mm or diameter of bar whichever is more
4. 25 mm

Codes:

A B C D

Q. If a 2-legged 8 mm diameter HYSD bar is used as shear reinforcement for a beam of width 230 mm and effective depth 300 mm, what is the nearest magnitude of the spacing of minimum shear reinforcement?

Q. Consider the following statements with regard to crack formation and its control:
1. The surface width of the crack should not, in general, exceed 0.30 mm for structures not subjected to aggressive environment.
2. When depth of web in a beam exceeds 750 mm, side face reinforcement @0.1 percent of web area should be provided on each face.
3. The nominal spacing of main bars in a slab should not exceed three times the effective depth of a solid slab or 300 mm, whichever is smaller.
Which of these statements is/are correct?

Q. A mild steel bar of length

450 m m

tapers uniformly. The diameters at the ends are

36 m m

18 m m

, respectively. An axial load of

12 k N

is applied on the bar.

E = 2 \times 10^{5} N / m m^{2}

. The elongation of the bar will be

View More

Join BYJU'S Learning Program

similar_icon

Related Videos

lock

Design of One Way Slab

OTHER

Watch in App

explore_more_icon

Explore more

Design of One Way Slab

Join BYJU'S Learning Program

CrossIcon