Given:
The diameter of the bottle's neck
=1.6 cm
⟹ Radius of the bottle's neck,
r1=0.8 cm
⟹ Area of the bottle's neck,
Aneck=π(0.8)2=0.64π cm2
The diameter of the bottle's bottom
=7.2 cm
⟹ Radius of the bottle's bottom,
r2=3.6 cm
⟹ Area of the bottle's neck,
Abottom=π(3.6)2=12.96π cm2
Assuming the cork has the same diameter of cross section as the bottle's neck, the thrust applied by the cork,
F=1.2 kgf Since it is the same bottle all the way down, the pressure experienced at the neck due to the plugging of the cork should be the same as the pressure felt at the bottom.
⟹FneckAneck=FbottomAbottom
⟹Fbottom=FneckAneck×Abottom
⟹Fbottom=1.2 kgf0.64π cm2×12.96π cm2
⟹Fbottom=1.2×20.25=24.3 kgf
1 kgf=9.807 N≈10 N
∴Fbottom=24.3×10=243 N