MyQuestionIcon

1

You visited us 1 times! Enjoying our articles? Unlock Full Access!

First Aid for Electric Shock

Consider a po...

Question

Consider a power system with three identical generators. The transmission losses are negligible. One generator (G1) has a speed governor which maintains its speed constant at the rated value while the other generators (G2 and G3) have governors with a droops of 5%. If the load of the system is increased, then in steady state.

A

Generation of G2 adn G3 is increased equally while generation of G1 is unchanged.

No worries! We‘ve got your back. Try BYJU‘S free classes today!

B

Generation of G1 alone is increased while generation of G2 and G3 is unchanged.

Right on! Give the BNAT exam to get a 100% scholarship for BYJUS courses

C

Generation of G1, G2 and G3 is increased equally.

No worries! We‘ve got your back. Try BYJU‘S free classes today!

D

Generation of G1, G2 and G3 is increased in the ratio 0.5 : 25 : 0.25

No worries! We‘ve got your back. Try BYJU‘S free classes today!

Open in App

Solution

The correct option is B Generation of G1 alone is increased while generation of G2 and G3 is unchanged.
Generation of G1 alone is increased while generation of G2 and G3 is unchanged.

Suggest Corrections

thumbs-up

0

Similar questions

Q. Two generators

G_{1}

G_{2}

rated as 200 MW and 400 MW respectively, are operating in parallel. The droop characteristics of their governors are 4% and 5% respectively from no load to full load. At no load, the generators are operating at a system frequency of 50 Hz. If total load of 600 MW is being shared by the generators, then generation in

G_{1}

G_{2}

are respectively

Q. A 10-bus power system consists of four generator buses indexed at G1, G2, G3, G4 and six load buses indexed as L1, L2, L3, L4, L5, L6. The generator-bus G1 is considered as slack bus, and the load buses L3 and L4 are voltage controlled buses. The generator at bus G2 cannot supply the required reactive power demand, and hence it is operating at its maximum reactive power limit. The number of non-linear equations required for solving the load flow problem using Newton Raphson method in polar form is

Q. Two generating units rated 300 MW and 400 MW have governor speed regulation of 6% and 4% respectively from no load to full load. Both the generating units are operating in parallel to share a load of 600 MW. Assuming free governor action the load shared by the larger unit is

Q. The figure shows a two-generator system supplying a load of P

_{D}

= 40 MW, connected at bus 2.

The fuel cost of generators G

_{1}

_{2}

_{1}

_{G 1}

) = 10,000 Rs/MWh and

IC

_{2}

_{G 2}

) = 12,500 Rs/MWh

and the loss in the line is
P

_{l o s s (p u)}

_{G 1}^{2} (p u)

, where the loss coefficient is specified in pu on a 100 MVA base. The most economic power generation schedule in MW is

Q. In a turbine generator set

R = 0.04 p . u .

based on the generator rating of 100 MVA and 60 Hz. The generator frequency decreases by 0.02 Hz and the system adjusts to steady-state operation. The turbine output power increases by

View More

Join BYJU'S Learning Program

similar_icon

Related Videos

lock

PHYSICS

Watch in App

explore_more_icon

Explore more

First Aid for Electric Shock

Standard VII Physics

Join BYJU'S Learning Program

CrossIcon