You visited us 1 times! Enjoying our articles? Unlock Full Access!

Introduction

Two bars of s...

Question

Two bars of same length and same cross -sectional area but of different thermal conductivities $K_{1}$ and $K_{2}$ are joined end to end as shown in the figure .One end of the compound bar is at temperature $T_{1}$ and the opposite end at temperature $T_{2}$ $(w h e r e T_{1} > T_{2})$ .
The temperature of the junction is

\frac{K_{1} T_{1} + K_{2} T_{2}}{K_{1} + K_{2}}

Right on! Give the BNAT exam to get a 100% scholarship for BYJUS courses

\frac{K_{1} T_{2} + K_{2} T_{1}}{K_{1} + K_{2}}

No worries! We‘ve got your back. Try BYJU‘S free classes today!

\frac{K_{1} (T_{1} + T_{2})}{K_{2}}

No worries! We‘ve got your back. Try BYJU‘S free classes today!

\frac{K_{2} (T_{1} + T_{2})}{K_{1}}

No worries! We‘ve got your back. Try BYJU‘S free classes today!

Open in App

Solution

The correct option is A $\frac{K_{1} T_{1} + K_{2} T_{2}}{K_{1} + K_{2}}$
Let $L$ and $A$ be length and area of cross-section of each bar respectively.

$∴$ Heat current through the bar 1 is
$H_{1} = \frac{K_{1} A (T_{1} - T_{0})}{L}$

At steady state, $H_{1} = H_{2}$

$∴ \frac{K_{1} A (T_{1} - T_{0})}{L} = \frac{K_{2} A (T_{0} - T_{2})}{L}$

$K_{1} (T_{1} - T_{0}) = K_{2} (T_{0} - T_{2})$

$K_{1} T_{1} - K_{1} T_{0} = K_{2} T_{0} - K_{2} T_{2}$

$K_{1} T_{0} + K_{2} T_{0} = K_{1} T_{1} + K_{2} T_{2}$

$T_{0} (K_{1} + K_{2}) = K_{1} T_{1} + K_{2} T_{2}$

$T_{0} = \frac{K_{1} T_{1} + K_{2} T_{2}}{(K_{1} + K_{2})}$

Suggest Corrections

Similar questions

Q. Two bars of same length and same cross-sectional area but of different thermal conductivities

K_{1}

and

K_{2}

are joined end to end as shown in the figure. One end of the compound bar is at temperature

T_{1}

and the opposite end at temperature

T_{2}

(where

T_{1} > T_{2}

).The temperature of the junction is

Two blocks of the same thickness and thermal conductivities $k_{1} a n d k_{2}$ are placed in contact. Their outer surfaces are kept at constant temperatures $T_{1} a n d T_{2}$ . If $T_{2}$ > $T_{1}$ , and $k_{2}$ > $k_{1}$ the temperature of the interfaces in the steady state will be

Q. Two rods

P

and

Q

have equal lengths. Their thermal conductivities are

K_{1}

and

K_{2}

and cross-sectional areas are

A_{1}

and

A_{2}

. When the temperature at ends of each rod are

T_{1}

and

T_{2}

respectively, the rate of flow of heat through

P

and

Q

will be equal, if

Q. If

K_{1}

and

K_{2}

are the equilibrium constants at temperature

T_{1}

and

T_{2}

, where

T_{2} > T_{1}

, then :

Two different metal rods of the same length have their ends kept at the same temperatures $θ_{1}$ and $θ_{2}$ with $θ_{2}$ > $θ_{1}$ . If $A_{1}$ and $A_{2}$ are their cross-sectional areas and $k_{1}$ and $k_{2}$ their thermal conductivities, the rate of heat flow in the two rods will be same if

Join BYJU'S Learning Program

Two bars of same length and same cross -sectional area but of different thermal conductivities K1 and K2 are joined end to end as shown in the figure .One end of the compound bar is at temperature T1 and the opposite end at temperature T2 (whereT1>T2).The temperature of the junction is