Forward Bias
Trending Questions
Why is the Zener diode used in reverse bias?
PN-junction diode works as an insulator when connected in?
To A.C
In forward bias
In reverse bias
None of these
A 2V battery is connected across the points A and B as shown in the figure given below. Assuming that the resistance of each diode is zero in forward bias and infinity in reverse bias, the current supplied by the battery when its positive terminal is connected to A is
0.2A
0.4A
Zero
0.1A
When a zener diode is operated in forward biased then
Two PN-junctions can be connected in series by three different methods as shown in the figure. If the potential difference in the junctions is the same, then the correct connections will be [IIT-JEE 1989]
In the circuit (1) and (2)
In the circuit (2) and (3)
In the circuit (1) and (3)
Only in the circuit (1)
When forward bias is applied to a p-n junction, then what happens to the potential barrier VB, and the width of charge depletion region?
VB increases, x decreases
VB decreases, x increases
VB increases, x increases
VB decreases, x decreases
The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating of 100 milliwatts. What should be the value of the resistor R, connected in series with the diode for obtaining maximum current
1.5 ohm
- 5 ohm
6.67 ohm
200 ohm
In the forward bias arrangement of a PN-junction diode
The N-end is connected to the positive terminal of the battery
The P-end is connected to the positive terminal of the battery
The direction of current is from N-end to P-end in the diode
The P-end is connected to the negative terminal of battery
- p-side is at a higher potential with respect to n-side
- n-side is at a higher potential with respect to p-side
- p-side is at the same potential as n-side
- None of these
In the forward bias arrangement of a PN-junction diode
The N-end is connected to the positive terminal of the battery
The P-end is connected to the positive terminal of the battery
The direction of current is from N-end to P-end in the diode
The P-end is connected to the negative terminal of battery
In the circuit given below, the value of the current is
0 amp
- is a heavily doped in reverse bias junction diode.
- is a lightly doped in forward bias junction diode.
- is a lightly doped in reverse bias junction diode.
- is a heavily doped in forward bias junction diode.